HydraTech installed a HydraTite seal in an irrigation system at a ranch in Idaho, ensuring the Bison got their much needed water.

HydraTech recently completed a HydraTite installation training in Washington which was detailed in one of our blogs. They ordered 14 of our seals to install in a 30" pipeline.

Our longest interlocking seal, 7 connected together, was installed in southern California as mentioned in our blog. This project is detailed in a Municipal Sewer & Water article as well.

Colorado DOT’s APL has HydraTite listed as a Culvert Lining Repair under the material code 707.12.01.00. We also repaired a 96" lake overflow pipe.

South Dakota Includes HydraTite On its APL as a culvert repair product.

HydraTech completed a job under a prime contractor for the Texas DOT to install HydraTite that was manufactured for 3' by 7' box culverts. We also completed a large job for Houston.

Ohio’s DOT has awarded HydraTech the maintenance contract 315-23 which is directly connected with HydraTite and many projects have come from it.

HydraTech has installed HydraTite on behalf of the Maine DOT. Another 60" seal was also installed in a stormwater pipe.

HydraTech has completed HydraTite installations for Florida's DOT and an elliptical installation for an HOA.

HydraTech has installed a HydraTite seal for the Alabama DOT as part of the process to get on their products list.

HydraTech recently gave a presentation to Georgia's DOT about HydraTite & intends to install a demo seal soon. We have installed HydraTite for the city of Atlanta and the city of Savannah.

HydraTech is currently installing HydraTite box seals under an air port in Mississippi.

HydraTite is listed on the Virginia DOT NPEL and has been assigned the number 2007-78. We have completed work in the state as well.

HydraTech has installed HydraTite for Watertown Connecticut and has installed the seal for the DOT in a 60" storm drain.

Tennessee's DOT has HydaTite listed on its Qualified Products Miscellaneous List. HydraTite has been installed in Tennessee as well.

HydraTech installed HydraTite in a 84” water main for a public works department in Nevada.

HydraTite was installed in a 60-inch reinforced concrete pipe (RCP) outfall line. This project is outlined in an article by Stormwater Solutions. HydraTite was also installed in a 48” storm sewer that ran beneath a homeowner’s driveway.

Four double-wide seals were installed as part of a Wisconsin DOT Project outlined in an article by Water World. Another project in the state resulted in HydraTite being installed in 72-inch pipe, dating back to 1950. This project is detailed in another article by Water World.

HydraTite was utilized in a Michigan DOT project as detailed by an article by Stormwater Solutions. HydraTite was also installed in a 72" culvert under interstate 90 as part of another Michigan DOT Project.

HydraTech installed hundreds of HydraTite seals below Buffalo and this blog outlines the details of the project.

Eight HydraTite box seals were installed in a pipe at a Generating Station in Pennsylvania.

HydraTech installed HydraTite as part of a River Pump Station Rehabilitation Project.

HydraTech recently installed two seals in box-shaped flumes for a water treatment facility in Kentucky. One was approximately 4 by 8 feet and the other was about 4 by 4 feet.

HydraTite was installed in a project owned by Massachusetts Turnpike Authority, the predecessor of MassDOT. Some of the seals were interlocked in a sleeve to cover a longer portion of the pipe.

HydraTite was installed in a water line for a municipality in Louisiana.